NV Tone Swan NT (Integrated) Mocca | Condenser Mic Pickup for Acoustic Guitar — NV Tone

Move your mouse over image or click to enlarge

NV Tone Swan NT (Integrated) Mocca

Name: NV Tone Swan NT (Integrated) Mocca
Brand: NV Tone
SKU: NV-SW-NT-IN-MC
Price: 249 USD
Availability: InStock

NV-Tone Swan NT (Integrated) Mocca Premium pickup for acoustic and classical guitars.
The built-in studio-quality condenser microphone captures the full spectrum of your instrument’s sound, accurately reproducing both nylon and steel strings while providing excellent feedback resistance.
Easy installation and multiple mounting options inside the guitar give you freedom and comfort in use.

The flexible gooseneck and adjustable mounting options allow your instrument to sound its best, whether in small rooms or on stage (with a rubber suppressor).

Reference NV-SW-NT-IN-MC

$249

No tax

Check Compatibility With Our Mic

NV Tone Swan NT Integrated Mocca

A professional integrated condenser microphone system for natural guitar sound, stable mounting and clean signal performance without batteries.

Included Equipment

Natural sheep wool tone filters included with every microphone
Aluminum microphone body with a flexible neck
Reliable instrument mounting with soft velvet coating
XLR inverter connector
High-quality 5 m / 16.4 ft audio cable: stereo jack to XLR connector
Integrated installation kit with stereo endpin and strap mount

Power & Connection

The NV-TONE Swan NT is a condenser microphone, so it should be connected to the appropriate microphone input on your mixer, combo amplifier, audio interface or recording device.

Enable phantom power when required. If your equipment does not provide phantom power, use an external phantom power adapter.

This setup eliminates the need to replace batteries. As battery power drops, microphone sound quality can degrade and unwanted noise may appear during important performances or recordings.

Demo Sound

DEMO SOUND 1

DEMO SOUND 2

DEMO SOUND 3

For the best experience, we recommend listening with headphones.

Internal Installation Guide

1 Remove the strap lock from the bottom of the guitar if it is installed. This is the recommended location for the endpin.

2 Create a 12 mm / 15/32 inch hole using a drill or router.

3 Secure the endpin with a nut and locknut, adjusting the output length beforehand if necessary.

4 Select the correct direction for left-handed or right-handed guitar installation.

5 Secure the cable in the appropriate place inside the instrument.

6 Slightly loosen the pickup screws.

7 Place the pickup into the soundhole and tighten the screws carefully.

8 Connect the stereo jack to the socket inside the guitar.

9 Connect the XLR connector to the microphone input of your mixer, amplifier, audio interface or similar device.

10 Turn on +48V phantom power if it is not enabled by default.

Bracket body: Polycarbonate
Cable length: 5m (16.4 ft)
Frequency range: 20 ~ 20000 Hz
Sensitivity: -32 ±3 dB
Signal-to-noise ratio: 74 dB
Operating voltage range: 12 ~ 48 VDC
Neck length: 12 cm (4.72 inch)
Directivity: omni-directional
Material: aerospace-grade 6061 aluminum
Lenght: 103mm
Width: 21mm
Minimal sound-hole lenght / diameter: 80mm
Maximal sound-hole lenght/diameter: 92mm

How It Works

The NV-Tone Swan microphone delivers a natural, clear and balanced sound on both classical nylon-string guitars and acoustic steel-string guitars.

How NV-TONE Swan microphone works with amplifiers, audio interfaces and live sound systems

1 Install the microphone inside your guitar using the official NV-Tone installation guide.

2 Connect the microphone to the XLR input of your audio interface, mixer, preamp or recorder.

3 Enable phantom power. The microphone works with +12V to +48V phantom power.

4 Adjust input gain and output volume. Usually 30–40% is enough.

5 Play, record or perform live with a stable and natural microphone sound.

Important: If your equipment does not provide +12–48V phantom power, use an external phantom power supply such as XVIVE P1, BEHRINGER PS400, ART Phantom I, Mackie M48, PSC 48 Phantom or a similar device.

Alternative Mounting Method with 3M Dual Lock SJ3540

Important Information:
(This installation method applies only to the NV TONE Swan Integrated version.)

For players who prefer a removable installation, the microphone can also be mounted inside the guitar using 3M Dual Lock SJ3540. This method provides a firm hold without drilling the guitar body.

NV-Tone Swan microphone mounted inside guitar

3M Dual Lock SJ3540 inside acoustic guitar

Benefits of this method

Strong fixation: 3M Dual Lock provides a stronger hold than regular Velcro and can safely support the microphone mount.
No drilling: the guitar body does not need to be drilled or permanently modified.
Vibration reduction: the dense structure of the fastener helps reduce unwanted vibration transfer.
Removable installation: the microphone can be attached or removed when needed.

Installation recommendations

Clean the mounting area inside the guitar from dust and rough particles.
Degrease the surface using a safe cleaner suitable for musical instruments.
Apply the 3M Dual Lock tape firmly to the selected area.
Allow the adhesive to set for 24 hours before attaching the microphone.

Installation & Operation Guide

The NV-Tone Swan microphone system is designed for quick installation and professional performance on both classical and acoustic guitars.

External Setup

Installation guide →

For External Installation

1 Unwind the cable and select the correct orientation for left-handed or right-handed guitar positioning.

2 Secure the cable in the appropriate position inside the guitar body.

3 Slightly loosen the pickup screws before installation.

4 Carefully place the pickup into the soundhole and tighten the screws securely.

5 Connect the XLR output to a mixer, combo amplifier, audio interface or other microphone input device.

6 Enable phantom power if it is not already active.

Internal Setup

Installation guide →

For Internal Installation

1 Remove the strap lock from the bottom of the guitar if installed. This location is recommended for the endpin output.

2 Create a 12 mm (15/32") hole using a drill or router.

3 Install and secure the endpin using the supplied nut and locknut. Adjust the output length beforehand if necessary.

4 Select the proper cable orientation for left-handed or right-handed guitar installation.

5 Secure the cable neatly inside the instrument body.

6 Loosen the pickup screws slightly before mounting.

7 Place the pickup into the resonator opening and tighten the screws carefully.

8 Connect the stereo jack to the internal guitar socket.

9 Connect the XLR output to your mixer, amplifier, preamp or audio interface.

10 Activate +48V phantom power if it is not enabled by default.

Delivery, Returns & Warranty

We work to ensure that every NV-TONE order arrives safely, quickly and with full customer support worldwide.

International Delivery

Worldwide Express Shipping

1 UPS Express delivery typically arrives within 5–7 business days.

2 Remote locations may require alternative express shipping with an estimated delivery time of 9–14 business days.

3 Every order includes tracking information for secure shipment monitoring.

Duties and import taxes for U.S. customers are already included in the product price. For other countries, local customs fees or taxes may apply depending on regional regulations.

Returns & Warranty

Customer Protection

1 Every order is covered by a 20-Day Money-Back Guarantee starting from the delivery date.

2 All NV-TONE microphones include a 2-Year Warranty covering manufacturing defects.

3 Returned items must be in original condition and complete packaging.

Have questions about shipping, warranty or customs? Contact us — our team will be happy to help.

Signature Mocca Mic Mount

NV-SW-SG-MM-MC

$25

“Your pickup, your name , your sound.” Enjoy free shipping when you order Signature Tops together with your NV TONE microphone. If you prefer to purchase Signature Tops separately, a flat $19 shipping fee applies worldwide.

Customers who bought this product also bought:

Signature Rosewood Mic Mount | Condenser Mic Pickup for Acoustic Guitar — NV Tone

Signature Tops

Signature Rosewood Mic Mount

NV-SW-SG-MM-RW

$25

Natural Tone Filter System

NV-NF-FS-STD

$25

The world’s first natural felt–based high‑frequency control system for guitar condenser microphones.INCLUDED WITH ALL SWAN PICKUPS

NV Tone Swan NT (Integrated) Ebony | Condenser Mic Pickup for Acoustic Guitar — NV Tone

NV Tone Swan Integrated

NV Tone Swan NT (Integrated) Ebony

NV-SW-NT-IN-EB

$249

NV-Tone Swan NT (Integrated) Ebony Premium pickup for acoustic and classical guitars.The built-in studio-quality condenser microphone captures the full spectrum of your instrument’s sound, accurately reproducing both nylon and steel strings while providing excellent feedback resistance.Easy installation and multiple mounting options inside the guitar give...

Signature Ivory Mic Mount | Condenser Mic Pickup for Acoustic Guitar — NV Tone

Signature Tops

Signature Ivory Mic Mount

NV-SW-SG-MM-IV

$25

NV Tone Swan XT (External) Rosewood | Condenser Mic Pickup for Acoustic Guitar — NV Tone

NV Tone Swan External

NV Tone Swan XT (External) Rosewood

NV-SW-XT-EX-RW

$249

NV-Tone Swan XT (External) RosewoodPremium pickup for acoustic and classical guitars.The built-in studio-quality condenser microphone captures the full spectrum of your instrument’s sound, accurately reproducing both nylon and steel strings, while providing excellent feedback resistance. Easy installation with no routing or other modifications required....

NV Tone Swan NT (Integrated) Ivory | Condenser Mic Pickup for Acoustic Guitar — NV Tone

NV Tone Swan Integrated

NV Tone Swan NT (Integrated) Ivory

NV-SW-NT-IN-IV

$249

NV-Tone Swan NT (Integrated) Ivory Premium pickup for acoustic and classical guitars.The built-in studio-quality condenser microphone captures the full spectrum of your instrument’s sound, accurately reproducing both nylon and steel strings while providing excellent feedback resistance.Easy installation and multiple mounting options inside the guitar give...

Signature Mocca Mic Mount | Condenser Mic Pickup for Acoustic Guitar — NV Tone

Signature Tops

Signature Mocca Mic Mount

NV-SW-SG-MM-MC

$25

NV Tone Swan NT (Integrated) Rosewood | Condenser Mic Pickup for Acoustic Guitar — NV Tone

NV Tone Swan Integrated

NV Tone Swan NT (Integrated) Rosewood

NV-SW-NT-IN-RW

$249

NV-Tone Swan NT (Integrated) Rosewood Premium pickup for acoustic and classical guitars.The built-in studio-quality condenser microphone captures the full spectrum of your instrument’s sound, accurately reproducing both nylon and steel strings while providing excellent feedback resistance.Easy installation and multiple mounting options inside the guitar...