For internal only
- Remove the strap lock from your instrument at the bottom of the guitar if it is there (we recommend this location for installing the endpin).
 - Make a hole with a drill or router with a diameter of 12 mm / 15/32 inches.
 - Secure the endpin with a nut and a locknut (adjusting the length of the output beforehand).
 - Select the direction for a left-handed or right-handed guitar on the pickup and secure the cable in the appropriate place.
 - Loosen the screws of the pickup slightly.
 - Place the pickup into the resonator hole and tighten the screws.
 - Connect the stereo jack to the socket in the guitar.
 - Connect the XLR connector to the microphone input of your combo, mixer, audio interface, etc.
 - Turn on the Phantom power (+48) if it is not enabled by default.
 
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                        
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                



















